Downloads
Utility Software
| 1 |
POS Printer Utility (2330KB)
This utility is for printer customization such as internal setting change, logo data registration.
Supported models: CT-S280/281/300/310/601/801/2000/4000/CBM1000II/PPU700/CD-S50x
|
| 2 |
CMP-10 Setup Tool (106KB) (CMP10SetupTool.exe) Explanation for CMP-10 Setup Tool (164KB) (CMP10SetupTool.pdf) This software is for configure CMP-10 through serial connector. |
| 3 |
Vue Print Utility (1600KB) (VuePrintUtilityInstaller.zip) Software Utility used to configure the CLP-521/621/631 series printers. |
| 4 |
CD-S500 Customization (2126KB) (SetupCDS500Cust.exe) Ver.1.02 This is for customizing CD-S500. |
| 5 |
CBM9x0II
Customization (2040KB) (SetupCBM9x0IICustomising.exe) Ver.1.0.0.0 This is for customizing CBM-9x0II. |
| 6 |
Ethernet (Serial) Interface Utility & Manual (714KB) (Ethernet_Serial_Utility_Manual.zip) This is to scan and configure the ethernet interface board. |
| 7 |
SEH Ethernet Utility (3834KB) (InterCon-NetTool-1.8.39.zip) Ver.1.8.39 This software is used to configure the Ethernet interface board on barcode printers |
| 8 |
CT-S280/S300/S2000/S4000
Serial Number Writer (1279KB) (SetupSNoWRT.exe) Ver.0.90.00 Explanation for CT-S280/S300/S2000/S4000 Serial Number Writer (41KB) (SerialNumberWriter.pdf) This software is to write unique ID to CT-S280/S300/S2000/S4000. |
| 9 |
Graphic Loader (2165KB) (SetupGRL.exe) Explanation for Graphic Loader (30KB) (GraphicLoader.pdf) This is to load logo data (graphic data) to Flash memory on printer. Moel: CBM1000/CBM1000II/IDP3240/PPU231II/BD2-122x. Feb 5, 2004 Ver.1.04 => 1.05 Ethernet interface support is added. Nov 29, 2005 Ver.1.05 => 2.00 USB interface support is added. |
| 10 |
Firmware Loader (2030KB) (SetupFML.exe) Ver.2.23 Model: CBM1000/CBM1000II/IDP3240/PPU231II/BD2-122x. Please use this software very carefully. In worst case, printer will be dead. |
| 11 |
CMP10LOAD (218KB) (CMP10LOAD.EXE) Explanation for CMP10 LOAD (5KB) (CMP10LOAD.pdf) This software is for loading firmwae to CMP-10 through serial connector. |
| 12 |
CT-S300 Maintenance (161KB) (SetupCTS300Mtn.exe) Ver.1.0.0.1 Explanation for CT-S300 Maintenance (90KB) (CT-S300Maintenance.pdf) This is for firmware loading etc. |
| 13 |
PPU-700 Maintenance (163KB) (SetupPPU700Mtn.exe) Ver.1.0.0.1 Refer to the Explanation of CT-S300 Maintenance. This is for firmware loading etc. |
| 14 |
Font Editor (2273KB) (SetupFE.exe) Ver.1.00 Rev.3 This is to make special font for EPROM/Flash memory models. |
| 15 |
Font Writer (2186KB) (SetupFW.exe) Ver.1.00 This is to design/load character data for Space page (Page 255). Model: CBM1000/CBM1000II/IDP3240/PPU231II/BD2-122x. |
| 16 |
Customer Display configuration (2051KB) (SetupDISP.exe) This is to set up C2202-PD. |